Jotun Paint Epoxy F60 for Ships

• Main Raw Material: Epoxy
• Paint Film Property: Anti-Corrosion
• Level: Primer
• Color: Grey, Red, White, Aluminum, Aluminum Red, Bronze
• Method: Spray, Brush, Roller
• Appearance: Liquid
• Model NO.: TH
• Dry Film Thickness: 50-300 Microns
• Flash Point: 26ºC
• Density: 1.4 Kg/1
• Purpose: Used for Ship External and Internal Areas
• Wet Film Thickness: 115-500 Microns
• Transport Package: Can
• Specification: Base material: 16 L Curing agent: 4 L total 20L
• Trademark: Jotun
• Origin: Qingdao
• HS Code: 3208909090
• Production Capacity: 50000 L/Year

Product Description

Product Description

1. Product name: Jotun  paint Primer Epoxy F60 Outfitting Primer for Ships
2. Introduce:This is a two component polyamine cured pure epoxy coating. An outfitting primer that meets the optimal adhesion requirements for many surfaces. Can be used as a primer or intermediate in atmospheric and immersion environments
Intercoat, topcoat, or single coat system. Suitable for properly treated carbon steel, steel, stainless steel, aluminum, galvanized steel, glass fiber reinforced polyester, and thermal spraying for painting workshop primer
The surface of zinc. The applicable temperature range is from low temperature -196 ° C to 210 ° C, for both insulated and uninsulated surfaces.
3.Typical use: External and internal areas, including the hull shell, superstructure, deck, and ballast tanks.
4.Industrial protective paint field:Recommended for use in marine engineering environments, refineries, power plants, and mining equipment.
Note: Due to volatile organic compound regulations, this product is not recommended for use in ballast tanks in Korea.
5.Color:Grey, red, white, aluminum, aluminum red, bronze
Due to the different thermal stability of pigments, slight color changes may occur when the coating is heated. Please note that such color changes will not affect the performance of the coating.
 

Advantages of Jotun paint

 

1. Environmental protection: Jotun products have low VOC and are superior to national emission requirements.
2. Superior cost-effectiveness: Jotun Paint's square meter cost is even lower than domestic paint.
3. Stable and excellent product quality: high-quality raw materials, continuously refined formulas, highly automated production, and strict quality control, creating products that adapt to harsh environments.
4. Complete range: No need to travel around to meet one-stop procurement needs.
5. Meet special needs: suitable for various substrates such as carbon steel, stainless steel, aluminum, galvanized sheet, concrete, etc; Suitable for food and drinking water environments.
6. Rapid delivery: professional transportation company transportation.
7. There are many use cases: from the world's top 500 enterprises to Township and Village Enterprises, involving all walks of life, you can find reassuring references.
8. High quality technical services: The advanced Jordan technical services in the industry completely eliminate your worries.

Product Parameters

performance	Testing or Standards	Description
Volume solid content	ISO 3233	60±2%
Gloss   GU 60 °	IS0 2813	Matte (0-35)
flash point	IS0 3679 Method1	26 °C
density	Theoretical value	1.4 kg/1
V0C - USA or Hong Kong	US EPA Method 24 (test value) (CARB (SCM) 2007, SCAQMD rule 1113, Hong Kong)	359 g/l
V0C -EU	IED (2010/75/EU) (theoretical value)	396 g/l
VoC -China	GB/T 23985- 2009 (after testing)	356g/l

 

Product Mix Ratio (Volume) 

Epoxy paint F60  component A 4 parts

Epoxy paint F60 component B 1 part


Guiding parameters for airless spraying

Nozzle aperture (inch/1000): 19-31

Nozzle pressure (minimum): 150 bar/2100 psi

Construction methods

This product can be constructed in the following ways

Spraying: Use airless spraying.

Brushing: Recommended for pre coating and small area painting. Pay attention to achieving a specific dry film thickness.

Roller coating: can be used in small areas. Not recommended for the first primer coating. Pay attention to achieving a specific dry film thickness.

storage

It must be stored in accordance with national regulations. The storage environment should be dry, cool, well ventilated, and away from heat and ignition sources. The packaging container must be kept closed. Handle with caution.
 

Detailed Photos

 

Application Cases

 

Industry News

                    Jotun helped the construction of Hong Kong-Zhuhai-Macau Bridge

 

 

The Hong Kong-Zhuhai-Macau Bridge, known as one of the "seven wonders of the modern world", was officially opened. This sea crossing bridge across the Lingdingyang Sea, with a total length of 55 kilometers and a design life of 120 years, is the first open sea deep buried tunnel project and a landmark in the history of architecture in China and the world. Jotun, as a supplier of coating solutions for various fields of the Hong Kong-Zhuhai-Macau Bridge project, has played an important role in helping it solve problems and successfully complete the project through its high-performance anti-corrosion, fireproof and environmental protection coating solutions.

In order to cope with the harsh marine environment and meet the design requirements of the bridge, Jotun Company has conducted strict testing and performance comparison of its products, providing a supporting system solution with excellent anti-corrosion performance. The scheme passed 5000 hours of aging resistance, 5000 hours of salt fog resistance and 240 hours of acid and alkali resistance tests to ensure that the Hong Kong-Zhuhai-Macau Bridge has a service life of 120 years. Secondly, in order to reduce the impact on marine ecology to a large extent, Jotun, as the main paint supplier of the project, provides lead free and low VOC paint products that fully meet the environmental requirements of the Hong Kong-Zhuhai-Macau Bridge.

 

Our Advantages

1.Our Shipyard:Ningbo Zhenhe shipyard, and now Taihang is the branch representative of our yard.
2.Our founding team has experience of more than 15 years in ship building and ship repair with our own engineer and designer.
3.Equipment quality guarantee: Based on shipyard feedback, we built up manufacturer file to ensure the good quality of the products. Also we can send our engineers to help our clients to install and test these exported equipment.
4.We are a second hand ship broker to help you find the satisfied used different kind vessels.
5.We are able to provide the CKD kits and one-stop service based on our laser-cutting machine and purchase ability
6.We have a very professional design and technical team to work out perfect plan for our clients and help to slove out any matters with pre-sale and after-sale.
7.Customer Distribution:  Tananzia, Rwanda, India(Mumbai and Kalkatta), Suva,  Portugal, Russia, Nertherland, Iceland, Denmark, Malaysia, Mexico.......