After-sales Service: | Guarantee Repair |
---|---|
Warranty: | 1 Years |
Cylinders: | 2 |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Spark Plug Gap | 0.9-1.0 mm |
Recommended Engine Oil | Outboard Motor Engine Oil |
Fuel Tank Volume | 24L |
Starting System | Manual |
Recommended Fuel | Unlead Gasoline |
Gear Position | Forward-Neutral-Reverse |
Brand | HIMARINE |
2 STROKE OUTBOARD MOTOR | |
Model (2-stroke) | HMT15D |
Demension | Overall Length:878mm Overall Width:330mm Overall Height S: 1062mm Overall Height L: 1189mm |
Net Weight | Short Shaft:38.5 kg Long Shaft:40.5 kg |
Gross Weight | Short shaft:50kg Long Shaft:52kg |
Full Throttle Operating Range | 4500-5500 r/m |
Maximum Output | 1 1 KW |
Idling Speed | 1050±50 r/m |
Displacement | 246 cc |
Bore&Stroke | 56*50mm |
Ignition Systerm | CDI |
Spark Plug | B7HS- 10 |
Spark Plug Gap | 0.9- 1.0 mm |
Control Systerm | Tiller Handle |
Starting Systerm | Manual |
Starting Carburetor Systerm | Choke Valve |
Gear Position | Forward-Neutral-Reverse |
Gear Transmission Ratio | 2.08 |
Trim and Tilt Systerm | Manual Tilt |
Recommended Fuel | Unlead Gasoline |
Recommended Engine Oil | 2-Stroke Outboard Motor Engine Oil |
Gear Oil | 0.250L |
Fuel Tanks Capacity | 24L |
Fuel Oil Ratio | 50: 1 |
Package Size | 143.5*72*45 cm |
2 Stroke Outboard Motor Boat Engine
|
2.5HP 3HP 5HP 6HP 9.8HP 9.9HP 15HP 18HP 20HP 25HP 30HP 40HP 60HP 75HP
|
4 Stroke Outboard Motor Boat Engine
|
2.5HP 6HP 15HP
|
Air Cooled Outboard Motor Boat Engine
|
Jet Pump Outboard Motor Boat Engine
|
Outboard Spare Parts:Crankshaft, crank pin, cylinder liner,key woodruff, propeller, piston, primary pump, clutch dog , carburetor repair kit, bracket,upper casing, lower casing, repair kit, washer, bolt , pin, spring, float, tube, clamp, bearing, seal, o-ring, cartridge, tab-trim, bushing ,cable, connector, coil ignition, CDI unit, water pump, collar, condenser, diaphragm, fuel filter, mount damper, shaft,spacer, spark plugs, starter, gear, pinion, gasket, gasket kit, impeller, et
1.Our Shipyard:Ningbo Zhenhe shipyard, and now Taihang is the branch representative of our yard.
2.Our founding team has experience of more than 15 years in ship building and ship repair with our own engineer and designer.
3.Equipment quality guarantee: Based on shipyard feedback, we built up manufacturer file to ensure the good quality of the products. Also we can send our engineers to help our clients to install and test these exported equipment.
4.We are a second hand ship broker to help you find the satisfied used different kind vessels.
5.We are able to provide the CKD kits and one-stop service based on our laser-cutting machine and purchase ability
6. We have a very professional design and technical team to work out perfect plan for our clients and help to slove out any matters with pre-sale and after-sale.
7.Customer Distribution: Tananzia, Rwanda, India(Mumbai and Kalkatta), Suva, Portugal, Russia, Nertherland, Iceland, Denmark, Malaysia, Mexico.......